Free Newsletter
Register for our Free Newsletters
Newsletter
Zones
Access Control
LeftNav
Alarms
LeftNav
Biometrics
LeftNav
Detection
LeftNav
Deutsche Zone (German Zone)
LeftNav
Education, Training and Professional Services
LeftNav
Government Programmes
LeftNav
Guarding, Equipment and Enforcement
LeftNav
Industrial Computing Security
LeftNav
IT Security
LeftNav
Physical Security
LeftNav
Surveillance
LeftNav
View All
Other Carouselweb publications
Carousel Web
Defense File
New Materials
Pro Health Zone
Pro Manufacturing Zone
Pro Security Zone
Web Lec
 
ProSecurityZone Sponsor
 
ProSecurityZone Sponsor
 
ProSecurityZone Sponsor
 
ProSecurityZone Sponsor
 
ProSecurityZone Sponsor
 
ProSecurityZone Sponsor
 
 
News

Fireray 5000 meets US safety standards.

Fire Fighting Enterprises : 15 November, 2007  (New Product)
Motorised Beam Detector from Fire Fighting Enterprises gains UL certification for smoke detection.
Underwriters Laboratories has evaluated and listed their first motorised beam detector as compliant with the American National Standards for safety. The Fireray 5000 from Fire Fighting Enterprises now boasts certification from UL in addition to LPCB, CPD & EN54:12, breaking new ground in the development of this smoke detection technology.

The F5000 incorporates several technological advancements that set it apart from previous detectors. A newly-developed motorised beam head works in conjunction with the sensor to automatically optimise the signal strength throughout the life of the unit. This works to keep the beam aligned with the reflective prism even in the event of gradual building shift, and can also factor in environmental factors such as dust buildup. These features strengthen false alarm immunity over time, and help to reduce the need for maintenance operations.

These new additions for the F5000 improve its functionality, whilst it retains the benefits intrinsic to the tried, tested and trusted beam technology that has preceded it: large area coverage per unit (c19800 sq ft as opposed to ~900 sq ft for a point type detector), reduced cabling and installation costs, and minimal aesthetic intrusion.

The Fireray's low-level system controller is connected to the detector head by a two-wire cable, and can be used to fully control and adjust the beam - making installation significantly easier. The detector head houses both the transmitter and receiver, with the beam being bounced off a prismatic reflector on the opposite wall. Beam-type detectors are particularly suited to protecting wide indoor spaces such as warehouses, open-plan offices, corridors and meeting-halls. By covering large areas with few units, costs and disruptions caused by installation and maintenance can be greatly reduced, and the fire security system can be much less obtrusive - which can be of particular benefit in historic or stylish settings.

Bookmark and Share
 
Home I Editor's Blog I News by Zone I News by Date I News by Category I Special Reports I Directory I Events I Advertise I Submit Your News I About Us I Guides
 
   © 2012 ProSecurityZone.com
Netgains Logo